3D Printing: Knurled brass inserts using a heat gun
August 31, 2017
In my current quest of building the Hypercube Evolution, one of the early and critical steps is putting in the knurled brass inserts into the 3D printed parts. These inserts are the receptacle for screws/bolts that would otherwise chew up the plastic you’ve printed. The standard instructions are to use a soldering iron but I wanted something with a little more accuracy so I used a heat gun. It works well so I thought I’d share a quick tutorial video I made!
Hypercube Evolution Build Log – Starting out
August 24, 2017
After the adventure that is learning about and buying a 3D printer, then learning how to print the hard way, I was left wanting more. Kit printers are a great start and I knew there were many options for upgrades. However the more I researched the upgrades, the more I wanted to understand 3D printing better from the ground up. Only one way to do that… the hard way … AKA build one from nothing more than some plans found on the internet. So starts my adventure with the Hypercube Evolution (HEVO).
Howto: Glass Bed Upgrade for the Monoprice Maker Select v2
June 16, 2017
One of the most commonly recommended upgrades I’ve found (For all printers) is switching to a glass bed (Technically tempered Borosilicate). While it is not a hard nor expensive upgrade, it can be a bit time consuming. Since your bed is very important to the print process, this shouldn’t be something to rush, so I’d recommend at least two hours to complete (not including print time). Please note that the process here should work just fine for the Wanhao Duplicator i3 and similar series printers however you may need to verify what the correct glass size is.
Selecting a 3D Printer
May 31, 2017
The field of Additive Manufacturing at Home, aka 3D Printers isn’t terribly new. However it is still a field in which it’s new to most people. It’s also a field that is very rapidly evolving. Therefore the hardest part for me to write is “which 3d printer to pick” because by the time you likely read this, there will be other new options to consider. So rather than telling you what to select, I’m going to share my thought process and a few things to keep in mind.
Down the 3D printing rabbit hole: a background
May 30, 2017
For those of you who happen to follow me on various social medias may have noticed a ton of Instagram posts as of late regarding 3D Printing. It makes for great writing material. A number of you have strongly requested more details, as it is my style to share my journey, this begins a series on 3D Printing. Let’s start with my background on 3D printing (or lack there of) and what I’m going for.