3D Printing: Knurled brass inserts using a heat gun
August 31, 2017
In my current quest of building the Hypercube Evolution, one of the early and critical steps is putting in the knurled brass inserts into the 3D printed parts. These inserts are the receptacle for screws/bolts that would otherwise chew up the plastic you’ve printed. The standard instructions are to use a soldering iron but I wanted something with a little more accuracy so I used a heat gun. It works well so I thought I’d share a quick tutorial video I made!
Hypercube Evolution Build Log – Starting out
August 24, 2017
After the adventure that is learning about and buying a 3D printer, then learning how to print the hard way, I was left wanting more. Kit printers are a great start and I knew there were many options for upgrades. However the more I researched the upgrades, the more I wanted to understand 3D printing better from the ground up. Only one way to do that… the hard way … AKA build one from nothing more than some plans found on the internet. So starts my adventure with the Hypercube Evolution (HEVO).