Tagged: 3d printing

2

3D Printing: Knurled brass inserts using a heat gun

In my current quest of building the Hypercube Evolution, one of the early and critical steps is putting in the knurled brass inserts into the 3D printed parts. These inserts are the receptacle for screws/bolts that would otherwise chew up the plastic you’ve printed. The standard instructions are to use a soldering iron but I wanted something with a little more accuracy so I used a heat gun. It works...

0

Hypercube Evolution Build Log – Starting out

After the adventure that is learning about and buying a 3D printer, then learning how to print the hard way, I was left wanting more. Kit printers are a great start and I knew there were many options for upgrades. However the more I researched the upgrades, the more I wanted to understand 3D printing better from the ground up. Only one way to do that… the hard way …...

0

Howto: Glass Bed Upgrade for the Monoprice Maker Select v2

One of the most commonly recommended upgrades I’ve found (For all printers) is switching to a glass bed (Technically tempered Borosilicate). While it is not a hard nor expensive upgrade, it can be a bit time consuming. Since your bed is very important to the print process, this shouldn’t be something to rush, so I’d recommend at least two hours to complete (not including print time). Please note that the...

0

So now I’m printing in PETG?!

Over the last two weeks or so that I’ve had my printer, I’ve learned a number of things. I haven’t had a chance to put “to paper” (or… blog, as it were) all of them, however last night I did my first print in PETG thought it was worth a quick mention while the hot end was still warm. Possibly the most important thing I’ve learned is that most people...

0

Selecting a 3D Printer

The field of Additive Manufacturing at Home, aka 3D Printers isn’t terribly new. However it is still a field in which it’s new to most people. It’s also a field that is very rapidly evolving. Therefore the hardest part for me to write is “which 3d printer to pick” because by the time you likely read this, there will be other new options to consider. So rather than telling you...